The Fuji San Longboard Surfboard

The Fuji San is a beautifully crafted all round long board that excels in both performance and nose riding.
Ability: Beginner/intermediate/advanced
Conditions: 1-3 feet high
Construction: PU & Foam
Fin system (not included)
Fin system FCS or futures (optional)

9'0 x 22 3/4 x 2 7/8 69Lt

9'2 x 22 3/4 x 2 7/8 71.5Lt

9'4 x 22 7/8 x 3 75.5Lt

9'6 x 22 7/8 x 3 77Lt

9'8 x 23 x 3 1/8 82Lt

The Fuji San is a beautifully crafted all round long board that excels in both performance and nose riding.

The outline has wider hips and the extra width at the back increases the amount of curve through the back half of the outline making it easier to carve through turns. The narrowing of the nose and reducing the weight up front reduces the swing weight of the board through a manoeuvre, thus making the board more responsive as well as reducing the chance of catching a rail in the pocket.

The entry curve is gradual at only 3 5/8” and the nose is narrow and has a single nose concave up to 18 1/2” inches from the entry point, thus allowing for decent hold when riding the nose. A rolled belly in the middle with 50/50 rails gives stability and the wider hips tapering inwards towards the tail with a Vee in the rails promotes manoeuvrability.

A mountain of all boards with an explosive side!

CONSTRUCTION POLYURETHANE/POLYESTER

Polyurethane blank with polyester resin is the most widely used construction for surfboards and has been for years. Recently polyester resin has become stronger and more ultraviolet stable which means the boards last longer and stay white even when exposed to strong sunlight on surf trips.

At Shibui surfboards we use a resin called Isophthalic which is the best polyester resin on the market, your board will stay whiter for longer. The polyurethane blanks we use are from US Blanks which supply all the top brands worldwide, they're strong and light. Shibui surfboards are built from the best materials out there, we do not cut corners on quality, if need advice please contact us.

ORDER PROCESS

Once you have paid for your surfboard and the money is cleared, you will receive an email with the shapers contact details. You will then be able to discuss exactly the specification for your board.

After your board has been specified the shaper will calculate the cost of the delivery, we will invoice you the delivery costs before the completion of the construction of your board.